Description

DAMEN MULTI CAT 2712

BASIC FUNCTIONS: Anchor handling, dredger service, supply, towing, hose handling, fish farm works and survey

CLASSIFICATION: Bureau Veritas I X Hull • MACH Tug Unrestricted navigation,• AUT-UMS

FLAG: Norwegian

DIMENSIONS (APPROX.)
LENGTH O.A.: 27.27m
BEAM O.A.: 12.50m
LENGTH LOAD LINE: 23.99m
DEPTH AT SIDES: 3.90m
DRAUGHT (AFT): ± 3.05m
DISPLACEMENT LIGHT SHIP: 405ton(m)
GROSS TONNAGE: 296GT

TANK CAPACITIES (APPROX.)
FUEL OIL: 109.5m3
FRESH WATER: 31.4m3
DIRTY OIL: 1.5m3
SEWAGE: 10.5m3
SLUDGE: 1.3m3
HYDR OIL: 2.2m3
LUB OIL: 1.7m3
BILGE WATER: 4.0m3
FW TANKS: 51.8m3

PERFORMANCES (APPROX.)
BOLLARD PULL (AVERAGE): 34.3ton(m)
BOLLARD PULL (MAX): 34.8ton(m)
SPEED: 10.5knots

PROPULSION SYSTEM
MAIN ENGINES: 2x Cat C32 TTA ACERT
TOTAL POWER: 1790 bkW at 1800 rpm
GEARBOXES: 2x Reintjes WAF 572L 7,091 : 1
PROPULSION: 2x fixed pitch propellers in Optima nozzles, 1900 mm
BOWTHRUSTER: Kalkman Beta 250H, 200pk / 184kW; Hydraulic driven

AUXILIARY EQUIPMENT
GENERATOR SETS: 2x Cat. C 04.4, 107 kVA each
HYDRAULIC POWER: Cat C12 TA, 339 kW 1800rpm
FUEL OIL SEPERATOR: Facet MV-11-AG

DECK LAY-OUT
ANCHOR: 2x 300 kg Pool TW (HHP)
ANCHOR WINCH: 1x Hydraulically driven, Kraaijeveld
DECK CRANES: 2x Heila HLRM 230-4SLK 9.8T @ 16,5 m with 5 tons winch incl. load limiting device
FRONT/ WIRE WINCH: approx. 100 ton @ 3 m/min pulling force 1st layer 23 ton @ 10 m/min pulling force 1st layer 120 ton pull brake holding force 1st layer
AFT / WIRE WINCH: 50 ton @ 7 m/min pulling force 1st layer 90 ton pull brake holding force 1st layer
MAKE FRONT & AFT WINCHES: Kraaijeveld
WIRE CAPACITY: 2 x 1200 m, diameter 64 mm, polypropylene wire
TOWING PINS FRONT: 1x WK double pin type with chain stopper
TUGGER WINCH: 1x Dromec HPV12000 12Ton @ 8-20m/min

ACCOMMODATION
Comfortable heated and air-conditioned accommodation for 7 persons in 5 cabins, galley, sanitary facilities, etc. Two double cabins and three single cabins.

NAUTICAL AND COMMUNICATION EQUIPMENT GMDSS AREA 3
SEARCH LIGHTS: 2x Pesch 2000 W
RADAR SYSTEM: 1x Furuno, FAR 2117
COMPASS: 1x Cassens & Plat, Reflecta 1
GYRO COMPASS: 1x Anshuetz, Standard 22
AUTOPILOT: 1x Sea pilot 76
GPS: 1x Furuno, GP-150 D
ECHOSOUNDER 2X: 1x Furuno, FE-700 and FCV295 38 kHz
SPEEDLOG: 1x Furuno, DS-80
AIS: 1x Furuno, FA-150
INTERCOM: Sigma-700
VHF: 2x Thrane& Thrane, RT6222, with DSC
HANDHELD VHF: 2x TR-20
SSB: 1x Thrane& Thrane, Sailor 6310
INMARSAT - C: 2x Thrane& Thrane, Sailor 6110
NAVTEX: 1x Furuno, NX-700
WATCH ALARM: 1x Marble, 421
CHART COMPUTER: 1x Olex

General details as follows:
LOA 27,27 m
Beam 12,45 m
Draft 2,85 m

Bollard Pull : 30 tons

Speed : 10 knots
Engines : 2 x Caterpillar / Caterpillar Inc C32 TTA Acert, 1.790 kw, 1.800 rpm, Propellers 1 Fixed Pitch (Port Side) + 1 Fixed Pitch (Starboard)
Auxiliaries Engines : 2 Caterpillar 86 kw, Bowthruster + No Sternthruster (1 Bow Thwart. FP thruster 184kw)

Capable of supplies of 110m³ Fuel Oils and 31m³ FW
2 Cranes / Gears installed with a max lifting capacity of 9,8 tons

Built in year 2014
Design is : Damen MC 2712
Class : Bureau Veritas
Flag : Norway
Gross Tonnage of 299 and Nett Tonnage of 88

Specifications

Engine(s)

2 x 1.790 kw, 1.800 rpm, Caterpillar / Caterpillar Inc C32 TTA Acert,
Propellers: 1 Fixed Pitch (Port Side) + 1 Fixed Pitch (Starboard)

Certification

REGISTERED Achilles Member:
- UVDB Registered
- CONNEXIO Accredited
- SELLIHCA Qualified

MEMBER Renewable Energy Hamburg
MEMBER Bundesverband Windenergie
MEMBER Windenergie Agentur Bremerhaven
MEMBER Windenergy Network

Disclaimer

GRS performs its services exclusively on the basis of its General Terms and Conditions, which are available at the GRS website www.grs-offshore.com.
All details are given in good faith but without guarantee. Subject to availability.

Location Map